Agitator Brush Roll; Agitator Belt; Storage - Hoover U9125 Manual

Agitator brush roll

The agitator brush roll is designed to last the lifetime of the cleaner. It
typically should not need replacement. If you feel the agitator brush roll
needs to be checked or replaced, take your cleaner to an Authorized
Hoover Sales and Service Center. Do not attempt to remove the
agitator brush roll.
The agitator cavity underneath the cleaner can be checked for
debris such as hair, strings, etc.
Disconnect cleaner from electrical outlet. Turn cleaner over and
remove any debris that has accumulated on the agitator brush roll. Do
not attempt to remove the agitator brush roll.
Return the cleaner to upright position.

Agitator belt

The agitator belt is designed to last the lifetime of the cleaner. It typically
should not need replacement. If you feel the agitator belt needs to be
checked or replaced, take your cleaner to an Authorized Hoover
Sales and Service Center. Do not attempt to remove the agitator
belt.
Storing your cleaner
Disconnect cleaner from electrical outlet.
Cord storage
Open the tool/cord storage compartment. Wrap the cord in a
28
clockwise direction around the two cord hooks, ending with the
plug end at the center of the storage cavity. The plug should not be
against the tool so it interferes with closing the door.
14