Hoover U9125 Manual page 13

Check behind access door
24 5. Turn cleaner OFF and disconnect from electrical outlet. Remove
access door (A); check for blockage. Replace access door.
Check airflow path
6. Remove hose from wand.
7. Plug cleaner in and turn ON. Check for suction at end of hose. If
25
there is suction, continue with step 9. If there is no suction, check for
blockage in hose. Clear blockage.
8. Turn cleaner OFF and disconnect from electrical outlet.
9. Lower handle to floor. Remove 2 screws, one on each side of the
26
hose. Check for blockage in hose. Clear blockage.
Check wand
10. Turn cleaner OFF and disconnect from electrical outlet.
11. Remove wand from cleaner. Check for blockage. Clear blockage.
27
A
(Cont'd)
13