Table of Contents
Advertisement
ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1) Connect the suction hose to the suction
tube.
3) Connect the nozzle to the suction tube.
POWER CORD
1) PULLING OUT
The power cord is long enough to be
drawn out for a convenience.
2) REWINDING
Upon finishing cleaning disconnect the plug
from the electrical outlet and just press the
cord rewind the button lightly with your toe.
NOTE
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
ON / OFF SWITCH
With the cord plugged into an electrical
outlet, start or stop the vacuum cleaner by
stepping lighty on the switch button.
2) Connect the suction tubes together.
4) Connect the hose clamper to the body
of the clamper along the arrow point.
3
Advertisement
Table of Contents
