Related Manuals for Samsung Powerbot R9000 SR2AK9000UG Series
Summary of Contents for Samsung Powerbot R9000 SR2AK9000UG Series
- Page 1 SR2AK9000UG Series POWERbot user manual ✻ Before operating this unit, please read the instructions carefully. English ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product.
-
Page 2: Table Of Contents
Contents Safety information Installation Accessories Charging Automatic charging / Recharging / Low battery Using POWERbot Selecting cleaning modes / Using Energy- saving mode Using the remote control Name of each part Top / Bottom / Display panel Cleaning and maintaining Cleaning the dustbin / Cleaning the sensors and the camera / Cleaning the Pet brush / Cleaning the Driving wheel... -
Page 3: Safety Information
Safety information Safety information Before operating the appliance, please read this manual thoroughly and retain it • for your reference. WARNING Because these following operating instructions cover various models, the • characteristics of your vacuum cleaner may differ slightly from those described in WARNING this manual. -
Page 4: Important Safety Instructions
Safety information important Safety inStrUCtionS When using an electrical appliance, basic precautions should be observed, including the following: reaD aLL inStrUCtionS Before USinG yoUr poWerbot. Unplug from outlet when not in use and before conducting maintenance. WarninG: to reduce the risk of fire, electric shock, or injury: GeneraL • Use only as described in this manual. -
Page 5: Save These Instructions
• Do not expose the adapter / docking station to high temperatures or allow moisture or humidity of any kind to come into contact with the adapter / docking station. poWerbot • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. - Page 6 Safety information reGULatory notiCe 1. fCC notice fCC CaUtion: cAutIoN • Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1.
- Page 7 2. iC notice • The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- Page 8 – There is a risk of fire or electric shock. – Place near candle, desktop lamps, fireplace or f Please check with a Samsung Electronics near combustible materials such as gasoline, service center when exchanging batteries. alcohol, thinners etc.
- Page 9 Before use in use CaUtion CaUtion f Insert the dustbin before using POWERbot. f Using POWERbot on thick carpet may damage both POWERbot and the carpet. f Be careful with the followings for proper – The POWERbot cannot pass over carpet that is automatic recharging.
-
Page 10: Installation
installation the docking station must be plugged in and turned on at all times. Install the docking station in a place without obstacles and danger of falling. D C - IN D C - I N Connect the Connect the Connect the adapter jack power cord to... -
Page 11: Accessories
accessories remote control Batteries (aaa type) User manual Docking station power cord adapter Note f Install the docking station in a place where the floor and wall are level. f It is best to install the docking station along the grain of wooden floors. f If the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station. -
Page 12: Charging
Charging It takes approximately 240 minutes to • Rated input voltage of this product completely charge the POWERbot when is 100-240 V~. WARNING charging it for the first time after purchase. Once charged, the POWERbot can be used for approximately 60 minutes. turn on the manually charge Check the... -
Page 13: Battery
automatic charging When the battery indicator blinks during cleaning, the poWerbot will return to the docking station to charge itself automatically. recharging you can command the poWerbot to recharge at the docking station while it is in cleaning. Low battery manually charge the poWerbot by placing it on the docking station. -
Page 14: Using Powerbot
Using poWerbot you must turn on the emergency switch on the bottom of the unit before using poWerbot. turning the power on/off • When POWERbot is not used for 30 minutes, power will turn off press the button for more than WARNING automatically. -
Page 15: Cleaning Mode
Selecting cleaning modes cleaning mode How to select Displayed icon Auto clean Spot clean ✻ ✻ The movement and direction of the Manual clean POWERbot is controlled by the remote control. ✻ ✻ When the POWERbot is being charged, you can select the Auto clean mode only. -
Page 16: Saving Mode
Using poWerbot Using energy-saving mode You may select the Energy-saving mode to save energy during battery charging. Energy-saving mode turns off all functions except battery charging. It reduces the power consumption while you are away from home for an extended period of time. How to select or cancel Displayed icon Press for 5 sec. -
Page 17: Using The Remote Control
Using the remote control 1 power/recharging Power Turn POWERbot's power on/off Select to recharge POWERbot at the Recharging docking station while it is cleaning. Start/Stop Select to start or stop cleaning 2 Cleaning modes Cleans all set places until the battery Auto clean is depleted. -
Page 18: Name Of Each Part
name of each part 1. Display panel 2. Dustbin holder 3. Remote control signal receiver 4. Obstacle sensor 5. Dustbin 6. Camera 7. Dustbin handle 8. Bumper sensor Bottom 1. Charge pins 2. Pet brush 3. Pet brush cover 4. Cliff sensor 5. -
Page 19: Cleaning And Maintaining
Cleaning and maintaining you must turn off the emergency switch before cleaning poWerbot. Cleaning the dustbin Remove the dustbin Remove the dustbin Remove dust in the cover dustbin and cyclone unit "click" Detach the cyclone unit Reassemble the Reinsert the dustbin from the dustbin cover, dustbin into the main body until... -
Page 20: The Driving Wheel
Cleaning and maintaining Cleaning the pet brush Remove the Pet brush Remove the Pet brush Clean the Pet brush cover Reassemble the Pet Reassemble the Pet brush brush cover Cleaning the Driving wheel Put a soft cloth on the floor and place Use a blunt rod or tweezers to remove foreign POWERbot upside-down on the cloth. -
Page 21: Notes And Cautions
notes and cautions Charging in use Note Note f If the battery overheats during charging, it f The POWERbot may get caught on may take longer to charge. thresholds, etc. during cleaning. – To restart operation, shut off the emergency f When automatic charging is not working, do switch, move the POWERbot to an area where the following:... -
Page 22: About Battery
– Filter: Completely dry it in the shade before before purchasing. using. f Purchase a filter at authorized Samsung f This battery is exclusively for the Samsung service centers if you need more filters. Electronics POWERbot. Do not use it for any other product. -
Page 23: Information Codes
information codes The information If a code appears, The information codes below turn off the code will disappear appear on the emergency when you turn on display panel switch and check the emergency the instructions switch below and take appropriate action Information codes checklist the poWerbot is caught, stuck, trapped or lifted while... -
Page 24: Troubleshooting
troubleshooting Symptom checklist fCheck if the emergency switch is on. fCheck if all the icons are displayed on the display panel. the PoWERbot is not working at all. fCheck if the POWERbot's battery is depleted. fReplace the batteries (AAA type) if the remote controller is not working. fWhen POWERbot is immobilized by an obstacle such as a cord, threshold etc, the PoWERbot pick it up and move it away from the obstacle. -
Page 25: Open Source Announcement
It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/VR9000H/seq/0 leads to the download page of the source code and open source license information as related to this product. This offer is valid to anyone in receipt of this information. -
Page 26: Specifications
Specifications classification Item Detail information Size 15 in x 5.35 in x 14.25 in (Depth x Height x Length) Mechanical Weight 9.5 lbs. specifications (PoWERbot) Sensor Ceiling shape recognition (Visionary mapping plus TM) Button type of POWERbot Touch type Power voltage 100-240 V~, 50 Hz/60 Hz Power Power consumption... - Page 27 memo ENGLISH-27...
- Page 28 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support DJ68-00740L-01...