DJ68-40131G(0.3) 2002.9.28 1:19 PM IMPORTANT SAFEGUARDS This appliance must be connected to the same mains voltage only as shown on the rating plate. This vacuum cleaner is not suitable for removing liquids of any kind. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit.
DJ68-40131G(0.3) 2002.9.28 1:19 PM ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the 2) Connect the suction tubes together suction tube. (depending on model). 3) Connect the nozzle to the *OPTION suction tube. 4) Connect the hose clamper to the body of the cleaner.
DJ68-40131G(0.3) 2002.9.28 1:19 PM ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly on the switch downward with your toe. ON/OFF SWITCH POWER CONTROL The vacuuming power can be adjusted to suit any situation with the electrical power control.
DJ68-40131G(0.3) 2002.9.28 1:19 PM TRANSPORTING AND STORING THE VACUUM CLEANER For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. REPLACING THE PAPER DUST BAG 2)Remove the dust bag from the cleaner 1) To open the dust cover of the dust bag compartment press the clamper upward...
DJ68-40131G(0.3) 2002.9.28 1:19 PM CLOTH FILTER BAG After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. There are two types of dust bag according to the model, one is paper dust bag type NOTE : the other is cloth filter bag type.
DJ68-40131G(0.3) 2002.9.28 1:19 PM CYCLONIC FILTER CYCLONIC FILTER CREVICE TOOL DUST BARREL You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it maintain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter.