Table of Contents
Advertisement
Presetting the Stations Automatically
or
You do not need to preset the stations if you have alread
Pp
y!
y
set them automatically (see Plug & Auto Set Up on
page 13).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You, must preset the stations received through the tuner. This can
fone:
@ Plug & Auto Set up (see page 13)
@ Automatically
@ Manually (see page 19)
You can store up to 80 stations.
'sss
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
'Press the corresponding « , w or 4, » buttons to select the
INSTALLATION option.
3
Press the OK button to select this option.
Result!
The INSTALLATION menu is displayed.
4
Press the corresponding « or w buttons, until the AUTO
SET
UP option is selected.
Press the » button to select this option.
5
Press OK to start the auto scanning.
Result!
The PLEASE
WAIT indication flashes on the
television screen.
+ The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and
so on.
« When the automatic scanning procedure has
finished, the VCR switches automatically to
programme 1.
>
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
_sotennetnsineeseee08
ce
NASON INSEAM
>
@ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
Advertisement
Table of Contents
