Connecting Other Equipment To Your Vcr; Plug & Auto Set Up - Samsung SV-3000 Instruction Manual

Connecting Other Equipment to Your VCR

GB
You can connect other audio and/or video equipment to your VCR in different ways.
The following illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the front of the VCR are used
for equipment, such as camcorders, VCRs or sound systems.
SV-3000
VIDEO AUDIO
VIDEO L AUDIO R
AUX
FRONT OF THE VCR REAR OF THE VCR
SV-910/SV-900/SV-810/SV-800
VIDEO AUDIO
VIDEO AUDIO
AUX
FRONT OF THE VCR REAR OF THE VCR
12
I I
Camcorder
LINE IN 1
LINE OUT
Sound system
I I
LINE IN 1
LINE OUT
I I
Plug & Auto Set Up
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your VCR to the TV Using the Coaxial Cable)
2
Plug the VCR into the mains.
Result:
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result:
VCR
5 Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
On completion, press MENU twice to exit the menu.
7
This will only happen if you have tuned TV to VCR or AV cables
are connected and TV is switched to AV.
Auto preset can be performed by pressing (STOP) on the
VCR continuously for 5 seconds or more with no tape
inserted.
The LANGUAGE SET menu is displayed.
or buttons.
œ ❷
A message appears.
GB
TV
VIDEO AUDIO
LINE IN 1
TV
LINE OUT
2
AUTO SET UP
PLEASE WAIT
60%
I -------I
END:MENU
CLOCK
12:00 1/JAN/2003
WED
➛❿¤¤¤¤¤¤¤¤¤¤¤
END: MENU
œ ❷
13