Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds; Searching For A Specific Sequence - Samsung SV-232B Instruction Manual

Playing a Sequence Frame by Frame

GB
You can:
1
OK
1
V LOCK
2
DISPLAY
CLR/RST F.ADV
TRK PROG
INPUT 1 INDEX
REPEAT

Playing a Sequence at Variable Speeds

You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
SLOW
The Shuttle function is available on the Remote control
SHUTTLE
1
V-LOCK
D
1 1
C / S
2
REVERSE REVERSE REVERSE
NOTE: The still frame and picture search facilities will be
34
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by frame.
Press:
❿
ll to start playing the cassette
❿
ll to stop the tape at a given frame
F.ADV
F.ADV ( ) to advance frame by frame
❿
To return to normal playback, press ll.
When you have been using the Frame-by-Frame function
for more than about five minutes, the VCR will auto-
matically play to protect the cassette and video heads.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the V-LOCK
V-LOCK
( ) buttons to minimize this effect.
You wish to analyze a sportsperson's technique,
movement by movement.
No sound is heard when playing a sequence at variable
speeds.
Press:
❿
ll during playback
SHUTTLE ( ) to play the cassette backwards
SHUTTLE ( ) to play the cassette forwards
SHUTTLE
Each time you press a SHUTTLE ( ) button, the speed is
changed as shown in the following illustration.
SLOW SLOW PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X7
X9 X7 X3 X1/10 X1/5
subject to very heavy noise bars. This does not indicate a
malfunction but is a by-product of the technology used
in the recorder to allow two tape speeds to be obtained
from a unit having a conventional two video head
configuration.
No colour:
During pause mode, occasionally there is no colour.
(SV-233B/SV-231B/SV-230B)

Searching for a Specific Sequence

Each time you record a cassette on this VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
Prev Seq. being
etc.
Seq. played
2 1
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
1 To search for a specific index, press INDEX.
2 Press the ➛ ➛ ❿ ❿
or buttons depending on the direction where your
desired programme is located. Each time you press the
buttons, the number decreases or increases respectively.
Result: The index number is displayed.
3 The VCR starts to search for the point you specified with the
❿ ❿
buttons.
Result: When the index is found, cassette playback starts.
You can set an index number up to ±20.
PLAY
X9
CLR/RST F.ADV
INPUT INDEX
REPEAT
1
Next
etc.
Seq.
1 2
INDEX : --
➛ ➛!!!!❿ ❿
➛ ➛ ❿ ❿
or
➛ ➛
or
INDEX : - 6
➛ ➛!!
OK
2
35
GB
TRK PROG
2