Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
Your VCR stops automatically after the requested length of time.
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
The station to be recorded using the PROG (" or ❷) buttons
The AV1 or AV2 (SV-633B/SV-630B/SV-6303B only)
source using the INPUT button for a satellite tuner or external
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
Hold the REC button ( ) down for a while to start recording.
Press the REC button ( ) several times to increase the recording
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
SET LENGTH :
If you wish to cancel the recording before the end, press
If the end of the tape is reached while recording:
The VCR is switched on automatically.
The channel number is displayed and the programme
can be seen on the television.
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
The recording stops
The VCR automatically turns off