Samsung SV-232B Instruction Manual: Connecting Your Vcr To The Tv Using The Coaxial Cable; Connecting Your Vcr To The Tv Using The Scart Cable

Hide thumbs
Deciding How to Connect Your VCR
B
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector
Location
Type
AV1(EURO AV) Rear
SCART
AV1(EURO AV)
OUT TO TV
Rear
75
TV
coaxial
IN FROM ANT. Rear
75
coaxial
AV2 IN
Rear
SCART
AV2 IN
(SV-633B/SV-630B/SV-6303B Only)
Audio output
Rear
Audio RCA
OUT
R
AUDIO
L
(SV-633B/SV-630B/SV-6303B Only)
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
Direction
Recommended Use
In/Out
Television
Satellite receiver
Other VCR
Out
Television
In
Aerial
Cable television network
Satellite receiver
In
Satellite receiver
Other VCR
Out
Audio Hi-Fi system

Connecting Your VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75 coaxial socket marked
rear of your VCR.
3
Plug the coaxial cable supplied into the
socket on your VCR.
TV
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the SCART cable
(see section below) if your television is equipped with this type of
connection.
Connecting Your VCR to the TV using the SCART Cable
Aerial
OUT
R
AV2 IN
AUDIO
L
TV
AV1(EURO AV)
2
You can connect your VCR to the television using the SCART cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
Make sure that both the television and the VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1(EURO AV) socket on the rear of the VCR.
3
Plug the other end into the appropriate connector on the television.
GB
ORTIE
D
AUDIO
G
TV
2
on the
TV
SORTIE
D
AUDIO
G
TV
3
4
TV
RF coaxial cable
3
SCART Cable
11

Advertising

   Related Manuals for Samsung SV-232B

This manual also for:

Sv-633b, Sv-630b, Sv-6303b, Sv-233b, Sv-231b, Sv-230b

Comments to this Manuals

Symbols: 0
Latest comments: