Connecting An S-Vhs Vcr; Connecting A Dvi-D Cable - Samsung LN32A32B Owner's Instructions Manual

653T-01-82 Eng.qxd 11/26/04 10:16 AM
I
N S TA L L AT I O N

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.

Connecting a DVI-D Cable

* Each external input source device has a different back panel configuration.
Page 13
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
2
Connect an audio cable
between the AUDIO
OUT jacks on the VCR
and the L-AUDIO-R
jacks on the TV.
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO jack on
the TV.
1
Connect a DVI-D
cable between the
DVI-D connector
on the TV
and the DVI connector
on the DVD player/
Set-top box.
2
Connect an audio
cable between the
L-AUDIO-R jack on the
TV and the
AUDIO OUT jacks
on the DVD player/
Set-top box.
13
English-