Remote Control See “Remote Control” in the owner’s instructions for details. POWER Turns the TV on and off. Selects the TV mode directly. NUMERIC BUTTONS Press to change the channel. Press to select additional channels(digital and analog) being broadcast by the same station.
Page 3
Satellite receiver (Set-Top Box) Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ➣ When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the ➣ cable.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables TV Rear Panel Component Cable (Not supplied) Audio Cable (Not supplied) Connecting a Camcorder TV Rear Panel Video Cable (Not supplied) Audio Cable (Not supplied) BN68-01516B-00Eng-0220.indd 4...
When connecting a VCR, match the color of the connection terminal to the cable. ➣ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable ➣...
When the receiver (home theater) is ➣ set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver.
PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Using the HDMI/DVI Cable Connect an HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer.
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ◄ or ► button, then press the ▲ or ▼ to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ENTER button.
ENTER Press the ENTER button to select “All”. Press the ◄, ►, ▲ or ▼ button to select a channel to delete, then press the ENTER Press the ▲ or ▼ button to select “Delete”, then press the ENTER button to delete the channel.
To Select the Source Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture Poor sound quality. No picture or sound.
Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Centre d’appel – heures de service (du lundi au dimanche, de 9 h à 12 h (HNE) Pour enregistrer ce produit, veuillez SVP aller à : www.samsung.com/global/register.
Page 13
Télécommande Vous pouvez utiliser la télécommande à une distance maximale du téléviseur d’environ 7 m. POWER Pour allumer et éteindre la télévision. Pour sélectionner directement le mode TV. Boutons numériques Permet de changer de chaîne. Appuyez sur ce bouton pour sélectionner des canaux...
Page 14
Lecteur DVD ou décodeur câble/ récepteur satellite (boîtier décodeur) La configuration du panneau arrière de chaque lecteur DVD ou de chaque décodeur câble/récepteur satellite (boîtier décodeur) diffère. ➣ Connexion d’un lecteur DVD ou d’un décodeur câble/récepteur satellite (boîtier décodeur) via DVI Pannear arrière de la télévision...
Lorsque vous connectez un magnétoscope, faites correspondre les couleurs de la ➣ borne et du câble. La couleur de la prise d’entrée AV IN 1 [Y/VIDÉO] (vert) ne correspond pas à la cou- ➣ leur du Câble vidéo (jaune). BN68-01516B-00Fre-0220.indd 5 Panneau arriére du...
Lorsque le récepteur (chaîne de ➣ cinéma maison) est réglé à On, il est possible d’entendre du son provenant de la prise optique du téléviseur. Lorsque le téléviseur émet des signaux numériques (air), il transmet le son en 5.1 canaux au récepteur de la chaîne...
Sortie audio de la carte son de votre ordinateur. Utilisation d’un câble HDMI/DVI Connectez le câble HDMI/DVI à la prise HDMI IN 2 [PC] à l'arrière de votre unité. Branchez un câble mini-prise stéréo 3,5 mm/2RCA entre la prise DVI IN (HDMI2) [R-AUDIO-L] du téléviseur...
Au moment de la sélection du système de télévision par Câble : Appuyez sur ENTER mémorisation automatique. Appuyer sur la touche ◄ ou ►, puis sur ▲ ou ▼ pour choisir la source du signal analogique appropriée “STD”, “HRC” ou “IRC”. Appuyez sur le bouton ENTER Si le Câble est numérique, sélectionner la source de...
Réglage de la liste de canaux Ce menu permet d’ajouter et de supprimer ou de définir les canaux favoris et d’utiliser le télé-horaire pour les diffusions numériques. Pour utiliser la fonction “Liste des canaux”, exécuter d’abord la fonction “Auto Program”...
Page 21
Pour sélectionner la source Appuyez sur la touche SOURCE de la télécommande. Vous pouvez sélectionner le mode TV ou une source d’entrée branchée au téléviseur. Cette touche permet de choisir la source d’entrée désirée. Sources de signal accessibles : TV, AV, Composante1, Composante2, PC, HDMI1, HDMI2.
Identification des problèmes En cas de problème, consultez d’abord la liste des problèmes potentiels et leurs solutions. Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le service à la clientèle de Samsung en composant le 1-800-SAMSUNG.
Page 23
Cette page est laissée intentionnellement en blanc. BN68-01516B-00Fre-0220.indd 12 2008-02-20 7:58:25...
Page 24
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Country...