Connecting An S-Vhs Vcr - Samsung LN-R269D Owner's Instructions Manual

C
O N N E C T I O N S

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
2
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
AV IN [ R-AUDIO-L ]
jacks on the TV.
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
AV IN [ S-VIDEO ] jack
on the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
VCR Rear Panel
VCR Rear Panel
VCR Rear Panel
14
English-
TV Rear Panel
RF Cable (Option)
TV Rear Panel
Audio Cable (Option)
RF Cable (Option)
TV Rear Panel
Audio Cable (Option)
S-Video Cable (Option)
RF Cable (Option)