Table of Contents
Advertisement
653T-01-82 Eng.qxd
11/26/04 10:16 AM
I
N S TA L L AT I O N
Antennas with 75-ohm Round Leads
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Page 8
1
Plug the antenna
lead into the
ANT IN terminal
on the bottom of the
back panel.
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the ANT IN
terminal on the
bottom of the
rear panel.
1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.
8
English-
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
Advertisement
Table of Contents
