Connecting An S-Vhs Vcr - Samsung LN-R238W Owner's Instructions Manual

C
O N N E C T I O N S

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
2
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
3
Connect an S-Video cable
between the
S-VIDEO OUT jack on the
VCR and the S-VIDEO IN
jack on the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
VCR Rear Panel
RF Cable
VCR Rear Panel
Audio Cable (Option)
RF Cable
VCR Rear Panel
Audio Cable (Option)
S-Video Cable (Option)
13
English-
TV Rear Panel
TV Rear Panel
TV Rear Panel
RF Cable