Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung LN32A32B Owner's Instructions Manual

653T-01-82 Eng.qxd 11/26/04 10:16 AM
I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
Page 9
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV.
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
2
Connect this cable
to a two-way splitter.
3
Connect an RF
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
This terminal might be labeled
"ANT OUT", "VHF OUT" or
simply, "OUT".
9
English-
This terminal might be labeled
"ANT IN", "VHF IN" or simply, "IN".