Presetting The Stations Manually - Samsung DVD-VR300E Instruction Manual

If you wish to cancel the auto scanning before the
8
end, press the OK button.
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required.
Presetting the Stations
Manually
If you have already set then automatically, you do not
need to preset the stations manually.
Open "MENU"
1
With the DVD in Stop mode, press the MENU
button.
2 Select "Setup"
❷
Using the buttons, move the selection bar
to "Setup" then press
3
Select "Install"
❷
Using the buttons, move the selection bar
to "Install", then press
Programme
❿
or OK button to select.
❿
or OK button to select.
Select "Manual Setup"
4
Move the selection bar to "Manual Setup", using
❷
the buttons then press
select.
TV System
Programme
❷
Press the buttons to select a PR number
5
as required then press
❷
Press the button to select Edit.
6
❿
Then press or OK button to be displayed
"Manual Setup" menu.
Manual Setup
PR 01
CH - - -
Name - - - -
Decoder Off
- - - - - -
MFT
System L /L'
Done
➛ ❿
Press the buttons to start scanning the
7
channels.
The frequency band is scanned and the first sta-
tion found is displayed.
❿
or OK button to
: K
: Ch 36
❿
or OK button to select.
Decoder System
- / -
Edit
- / -
Delete
- / -
Swap
- / -
- / -
- / -
- / -
English - 27