Recording Through A Dv Jack; Basic Vcr Recording - Samsung DVD-VR300E Instruction Manual

Recording through a DV
jack
Follow these directions to record onto a disc the outputs
of a camcorder that has a DV output jack.
Connect the DV output jack of your camcorder to
1
the DV input jack on the front of your DVD
Recorder-VCR using a DV cable.
Power on your DVD Recorder-VCR and switch
2
to DV mode by pressing the INPUT SEL. on the
remote.
With your DVD Recorder-VCR stopped, set the
3
operation mode of your camcorder to play mode.
Press the (REC) button on your DVD
4
Recorder-VCR when the image from which you
want to start recording is displayed.
Press the (STOP) button on your DVD
5
Recorder-VCR when the recording is finished.
Some camcorders may not work with your
DVD Recorder-VCR even if they have a DV
Note
output jack.
Also refer to the user manual for your
camcorder when recording through a DV jack.

Basic VCR Recording

DVD-RAM DVD-RW DVD-R
1. Check TV Programme and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a
blank tape and pressing the (REC) button. You can
even add time in 30-minute increments up to 9 hours by
pressing the (REC)button repeatedly; see page 69.
Note
1
2
3
4
5
Be sure your videotape has a Record Safety
Tab. If the tab is missing, you can cover the
opening with a small piece of tape. Warning:
Do not cover this opening unless you are sure
you want to record over the tape.
Insert Tape
Insert a blank Video tape into the VCR deck.
• Make sure the tape is long enough to record
the entire programme.
To change the Recording Speed, see page 68.
Select a Programme to Record
Use the 0–9 buttons or the PROG/TRK
buttons to select the desired Programme, or
press the INPUT SEL. button to select AV1, AV2
or AUX or DV if recording from an external
device connected to the front or rear inputs,
respectively.
Start Recording
Press the REC button on the remote control or
front panel.
For options while recording is in progress, see
"Special Recording Features".
Pause/Resume Recording
Press the II (REC PAUSE) button.
Press (REC) again to resume.
Stop Recording
Press the (STOP) button.
/
English - 75