Selection The Colour Mode - Samsung DVD-VR300E Instruction Manual

Selection the Colour
Mode
Before recording or playing back a tape, you can select
the required system standard. Otherwise, the system
automatically selects the reception standard when you
select Automatic.
• When playing back a tape, the standard is automatical-
ly selected by the DVD Recorder-VCR.
Open "MENU"
1
With the VCR in stop mode.
Press the MENU button.
Select "Setup"
2
❷
Using the buttons, move the selection bar
to "Setup" then press
Select "System"
3
❷
Using the buttons, move the selection bar
to "System" then press
Programme
40 - English
❿
or OK button to select.
❿
or OK button to select.
Select "VCR"
4
Move the selection bar to "VCR", then press
or OK button.
VCR
Front Display
NICAM
Programme
AV1 Output
Select "Colour System"
5
❷
Using the buttons, move the selection bar
to "Colour System" then press
select Colour System option.
Automatic -> PAL -> SECAM-> MESECAM ->
B/W.
• Automatic : When playing back a tape, the sys-
tem standard is automatically
selected by the DVD Recorder-
VCR.
• MESECAM : MESECAM cannot be selected
automatically. If you want to select
MESECAM, select 'MESECAM'
• B/W : Black and White.
Programme
On completion, press RETURN three times to
6
exit the menu.
❿
System
: Automatic
: On
: RGB
❿
or OK button to
SECAM
MESECAM