Press the OK button.
3
• The information concerning the programme is
displayed.
• When using the ShowView function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
❷
buttons.
DVD-RAM(VR)
No
To
PR
No.01
01
To
DVD
02
Day
TUE 13
03
04
08
:
20
Start
05
SP
Speed
06
DVD-RAM(VR)
TUE 13 08:20
Refer to the following page if:
• The programme number or times flash
• You wish to modify the programme
If the programme and times are correct, press
4
the OK button.
Press the STANDBY/ON button to activate the
5
timer.
Refer to page 71~72 if you wish to:
6
• Check that your DVD Recorder-VCR has been
programmed correctly
• Cancel a preset recording
68 - English
Scheduled Record List
End Speed V/P Edit
Start
PR
01
10
:
20
End
Off
VPS/PDC
Scheduled Record List
10:20
The numbers next to each TV programme list-
ing are ShowView code numbers, which allow
Note
you to programme your DVD Recorder-VCR
instantly with the remote control. Tap in the
ShowView code for the programme you wish
to record.
ShowView is a trademark of Gemstar
Development Corporation. The ShowView
system is manufactured under licence from
Gemstar Development Corporation.