Setting The Clock; Presetting Channels With The Auto Setup Function - Samsung DVD-R150 Instruction Manual

DVD-Recorder Clock Set
No Disc
Programme
Setup
Date Time Auto Clock
JAN 01 2007 12 00
MON
MOVE OK RETURN EXIT
Auto Channel Memory
17%
Stop

Setting the Clock

This menu is used to set the current time.
You need to set the time to use timer recording.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
On
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Clock Set, then press the OK or ► button.
Use the ▲▼◄ ► buttons to input Time, Date or Year. Use number buttons
to input clock data directly.
4. Press the OK button, then the date and time will be saved.
If you don't press the OK button, it will not be saved.
■
You must have the RF cable connected to set the Auto Clock.
(See page 15)
■
The DVD Recorder automatically sets the clock according to the time
signal broadcast between the channels PR1 to PR5. If you do not need
the Auto clock set function, select Off .
Presetting Channels with the Auto Setup
function
This feature allows you to manually set the DVD Recorder tuner band to
Antenna or Cable, whichever you connected to the Antenna In jack during
initial setup.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Install, then press the OK or ► button.
4. Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button.
The message "Your data will be lost. Press [OK] to continue, [MENU] to exit. " is
displayed.
5. Press the OK button to continue.
If you want to exit, press the EXIT button.
6. Channel scan will be started.
Press the OK button to stop the Auto Setup.
English - 22