Making A One Touch Recording(Otr); Using The Showview Feature; Making A One Touch Recording; (Otr) - Samsung DVD-VR300E Instruction Manual

Making a One Touch
Recording (OTR)
One-Touch Recording (OTR) allows you to add record-
ing time in 30-minute increments up to 9 hours at the
touch of a button.
Use the PROG/TRK
1
buttons to select the stations to record.
Start Recording.
2
Follow the instructions on page 66 to begin
recording.
Activate OTR.
3
While in Record mode, press the REC button
again to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder-VCR will record
for exactly 30 minutes.
Add Recording Time.
4
Continue pressing REC to add recording time in
30 minute increments up to 9 hours.
• The DVD Recorder-VCR stops recording auto-
matically when the time has elapsed.
REC 30 1'00
9' 8' 7'
DVD-RAM DVD-RW DVD-R
/ buttons or number
1'30 2' 2'30 3'
6' 5' 4' 3'30
Using the ShowView
Feature
Before presetting your DVD Recorder-VCR:
• Switch on both the television and your DVD Recorder-VCR
• Check that the date and time are correct
• Insert the cassette or Recordable DVD on which the
programme is to be recorded (safety tab intact) Up to twelve
programmes can be preset.
To enter a ShowView, press the TIMER REC
1
button. Press the
select ShowView.
• A message is displayed to allow you to enter the
ShowView code.
• If all twelve programmes have been set, the
message Timer is full is displayed. Refer to page
71~72 if you wish to cancel a preset recording.
DVD-RAM(VR)
ShowView
Standard Timer
Playlist
ShowView Extended
Disc Manager
Programme
Press the numeric buttons to enter the code
2
opposite the programme that you wish to record
in your television magazine.
• If you wish to correct the ShowView code that
you are entering:
- Press the ➛ button until the digit to be
corrected is cleared
- Enter the correct digit
DVD-RAM(VR)
Playlist
Enter ShowView Code number.[0-9]
Disc Manager
Programme
❷
and ❿ or OK buttons to
Programme
:Off
ShowView
English - 67