Unpacking; Accessories; Connecting Dvd Recorder-Vcr To The Tv; Using The Rf Cable - Samsung DVD-VR300E Instruction Manual

Step 1: Unpacking

Accessories

Check for the supplied accessories below.
• Audio/Video Cable
• RF Cable for TV
• Remote Control
• Batteries for Remote Control (AAA Size)
• User's Manual
* Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Step 2: Connecting DVD
Recorder-VCR to the TV using
the RF Cable
You have to connect the DVD Recorder-VCR to the TV
using the scart cable, without forgetting the RF cable.
Using the scart cable is necessary and it enables you to:
• get a better image quality,
• make the DVD Recorder-VCR tuning procedure easier.
Whichever connection method you choose,
the provided RF cable must always be con-
Note
nected. Otherwise, you won't get any image
on the TV screen if the VCR is off.
Make sure that the TV and the VCR are both
off before making any connections.
Disconnect the input aerial or cabled network
1
cable from the TV.
Connect the cable to the 75 Ω coaxial connector
2
marked located at the back of the DVD
Recorder-VCR.
16 - English
Connect the provided RF cable to the connector
3
marked at the back of the DVD Recorder-
TV
VCR.
Connect the other end of the cable to the TV aer-
4
ial jack, which was used for the aerial input.
Connect the power cable to a wall outlet.
5
In order to correctly get the TV channels
(cable, satellite or conventional broadcasting)
Note
you have to connect to the DVD Recorder-
VCR :
an outdoor or indoor conventional aerial
(access to the cable network),
a demodulator or a satellite set top box.
TV
ANT
Aerial
AUDIO OUT
R R
L L
DIGITAL AUDIO OUT
OPTICAL VIDEO
COAXIAL
RF cable