Connecting External Devices; Connecting A Extemal Devices To The Aux Kacks; Connecting A Camcorder To The Dv In Jack; Preparing The Remote Control - Samsung DVD-VR300E Instruction Manual

Step 6 : Connecting
External Devices
This allows you to connect your DVD Recorder-VCR to
other external devices and view or record their outputs.
• Method 1 : Connecting a external divices to the AUX in
jacks.
• Method 2 : Connecting a Camcorder to the DV IN jack.
Method 1 : Connecting a external
devices to the AUX jacks
You can use the AUX jacks on the front panel of the DVD
Recorder-VCR. You can record from connected equip-
ment.
or
OUTPUT
CAMCORDER
L
AUDIO AUDIO
R
S-VIDEO
Method 2 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to the
DV input jack of your DVD Recorder-VCR.
•
If your camcorder has a DV output jack, see page 75
for more information.
Step 7 : Preparing the
Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental reg-
ulations. Do not put them in the household trash.
English - 21