Using The Tape Counter - Samsung DVD-V90K Manual

Using the Tape Counter

The tape counter:
N Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
N Is reset when a cassette is inserted in the DVD-VCR
N Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
N
Press INFO. twice to display the counter
N
Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
N
Start playback or Recording.
N Press the I button.
N
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➢
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 27).
Press INFO.:
N
Once to display the current function, programme
number, recording speed, date, time and counter
N
Twice to display the counter only
N
Three times to display the time remaining on the
cassette
N
Four times to clear the display
➛ ➛ or ❿ ❿ .
VCR
0:00:00
KARAOKE SEARCH
KARAOKE
2
VOLUME PROG / TRK
39
GB