VCR
Install
User Set
Auto Power Off
Screen Messages
GB
Auto Setup
Manual Setup
TV System
VCR Output CH
VCR
Install
User Set
Auto Power Off
Screen Messages
Auto Setup
Manual Setup
TV System
VCR Output CH
22
Selecting the RF OUT Sound Mode (G-K)
You can choose the sound mode (G or K) according to the TV set
connected to your VCR.
: Off
: On
Install
G
: G
: CH 36
K
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
: Off
: On
Install
CH:21
: G
:
: CH 36
CH:36
:
CH:69
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK button to select this option.
Result:
The
Install
4
Press the
or
buttons, until the
❷
selected.
5
Press the ➛ or ❿ button to select G or K.
6
On completion, press RETURN to exit the menu.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The
Install
4
Press the
or
buttons, until the
❷
selected.
5
Select the required output channel (CH21~CH69) by pressing the
OK or ❿ buttons.
CH21
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
,
buttons to select the
❷
menu is displayed.
TV System
,
buttons to select the
❷
menu is displayed.
VCR Output CH
. . CH36
. . CH69
Install
option is
Install
option is