Table of Contents
Advertisement
Setting Up the Display Options
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
,
3
Select Display Setup using
button.
4
Use the
,
buttons to select the desired item. Then press the
❷
OK or ❿ button.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
• Black Level
Adjusts the brightness of the screen.(On/Off)
• NTSC Disc Output
"NTSC" if the screen only has one NTSC-video entrance. If this
is not the case, you can choose to leave " PAL 60Hz" as is.
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Video : Sends COMPOSITE VIDEO signal to the Scart JACK.
buttons, then OK or ❿ button.
❷
buttons, then press the OK or ❿
,
❷
DVD
Setup
Setup
Display Setup
Setup
:
Display Setup
TV Aspect
: 4:3 L-Box
Black Level
NTSC Disc Output
: PAL 60Hz
DVD Out
: Component
GB
47
Advertisement
Table of Contents
