Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback; A/V - Samsung SC-D453 Owner's Instruction Book

ENGLISH

Playback

Connecting to a TV which has no Audio and Video Input Jacks

✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Multi-AV cable.
I The yellow jack: Video
I The white jack: Audio(L) - Mono
I The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
5. Turn on both the TV and VCR.
I Set the input selector on the VCR to Line.
Select the channel reserved for your
I
VCR on the TV set.
6. Play the tape.
Playback
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch
to PLAYER.
2. Set the Mode switch to TAPE.
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first
position you wish to play back.
5. Press the (PLAY/STILL) button.
I The images you recorded will appear on the TV
after a few seconds.
I If a tape reaches its end while being played
back, the tape will rewind automatically.
[ Notes ]
I The playback mode (SP/LP) is determined by the mode in which
the tape was recorded.
I If the VCR has an S-Video input terminal, you may use S-Video
Connector for better quality.
The S-Video Connector transmits video only. Connect Audio cables
I
for sound.
I If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
✤
Video input-Yellow
S-Video input
Audio input(left)-White
Audio input(right)-Red
VCR
DV
USB
AV/ S
TV
Audio/Video/
S-Video
Antenna
I
SP LP
I
I
S-Video (
I

A/V

1.
Camcorder
I
: Video (
I
:Audio (L) [
I
:Audio (R) [
2.
3. PLAYER(
4. Mode
5.
I
I
6.
✤
Player ( )
1. ,
2. TAPE (
Mode
3.
4. (REW( ))
5. (PLAY/STILL(
I
,
I
,
, S-Video ,
S
)
, :Audio(L) [
)
]-
]
)
TAPE( )
.
LINE
PLAYER ( )
)
(FF( ))
))
/
.
]
71 71