ENGLISH
Preparation
Adjusting the Hand Strap
It is very important to ensure that the Hand strap has been correctly
adjusted before you begin your recording.
The Hand strap enables you to:
-
Hold the Camcorder in a stable, comfortable position.
-
Press the ZOOM and Start/Stop button without having to change the
position of your hand.
Hand Strap
1. Insert the Hand strap into
the Hand strap hook on the
front side of the Camcorder
and pull its end through the
hook.
2. Insert your hand into the
hand strap and adjust its length for your convenience.
3. Close the Hand strap.
When You carry Your
Camcorder
1. Pull and open the Hand
strap cover to release the
Hand strap.
2. Remove it from the ring and
adjust its length.
3. Put your hand through the Hand
Strap and close the cover of Hand Strap.
Attaching the Lens Cover
1. Hook up the Lens cover with
the Lens cover strap as
illustrated.
2. Hook up the Lens cover
strap to the Hand strap, and
adjust it following the steps
as described for the Hand strap.
3. Close the Hand strap.
18
18
1
1
2
1
,
:
-
-
,
ZOOM
2
3
3
2
3
,START/STOP(
/
)
1.
2.
,
3.
1.
,
2.
,
3.
,
1.
2.
,
3.