Using The Lithium Ion Battery Pack; Charging The Lithium Ion Battery Pack - Samsung SC-D453 Owner's Instruction Book

ENGLISH
Preparation

Using the Lithium Ion Battery Pack

✤ The amount of continuous recording time available depends on.
- The type and capacity of the Battery pack you are using.
- How often the zoom function is used.
It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the Battery pack to the Camcorder.
2. Connect the AC Power adapter to an AC Cord and
connect the AC Cord to a wall.
3. Connect the DC cable to the DC jack socket on
the Camcorder.
4. Turn the Power switch to OFF, and the charging
indicator will start to flash, showing that the battery
is charging.
Blinking time
Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and
off for a second
5. When the battery is fully charged, disconnect the Battery
pack and the AC Power adapter from the Camcorder.
Even with the Power switched OFF, the Battery pack will still
discharge.
[ Notes ]
I
The Battery may contain a slight charge at the time of
purchase.
I To prevent reduction in the life and capacity of the Battery
pack, always remove it from the Camcorder after it is fully charged.
I The amount of continuous recording time available depends on:
- The type and capacity of the Battery pack you are using.
- How often the zoom is used.
- Type of use (Camcorder/Camera/With LCD screen etc.).
- Ambient temperature.
It is recommended to have additional battery packs available.
I Even when the Power switched Off, the Battery pack will still discharge
if it is left attached to the device.
Power Switch
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error - Reset the Battery pack and
the DC cable
4
< Charging indicator>
✤
-
ZOOM(
1.
2.
3.
4.
1 1
1 2
1 3
,
1 , 1 ( 1 )
5. ,
I
I
I
ZOOM(
I
,
,
,
50%
50%~75%
75%~90%
90%~100%
-
,
,
, ,
,
,
,
21 21