Table of Contents
Advertisement
NOTICE DTR 500.qxd
7
Change the settings of your receiver
22 CHANGE THE SETTINGS OF YOUR RECEIVER
7/09/2004
15:25
Page 22
7.1
7.1.1
- In normal viewing mode, press <MENU> to display the
Main Menu, including the Puck element.
The Puck element is always present when the menu is
displayed.
The Puck contains 5 elements:
- the yellow ball indicating the current selection;
- the
indicating possible navigation directions.
Note: the Puck cursors are transferred to the right-hand side of
the menu window for the adjustment of the setting values.
The up, down, right and left cursors appear at the top,
bottom, left-hand side, and right-hand side of the value
window respectively.
- Press <MENU> to exit any menu screen.
7.1.2
The selection is on the first item of the menu.
- Press the
selection on the wanted menu item.
- Press the
to the highlighted item. Repeat this step as many times as
necessary to access the desired option.
Note: press <BACK> to get back one level in the menu.
- Then press the
option value.
7.1.3
You have selected a value for a setting as described above.
- Either press the <BACK> button to cancel changes, or
press the
In both cases, the selection is brought one level up in the
menu.
- When the Menu is on, press the <MENU> button to close it.
General information
Basics about menu navigation
t
,
y
,
u
and
i
green cursors, with red arrows
Change setting
or
button to scroll up/down to bring the
t
y
button to display the sub-items corresponding
i
or
button to select the desired
t
y
Cancel/Store changes
button to store the changes.
u
Advertisement
Table of Contents
