Switching The System On; Switching The System To Standby Mode; Plug And Play; Switching The System To Eco Power Standby Mode - Philips MCI200/21M Manual

Basic Functions
To exit without storing the Plug and Play
Press Ç.
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the power supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, " PLEASE CHECK ANTENNA PLEASE CHECK ANTENNA " is
PLEASE CHECK ANTENNA PLEASE CHECK ANTENNA PLEASE CHECK ANTENNA
displayed.

Switching the system on

In standby mode
Press STANDBY ON to switch on the last
selected source.
Press PC LINK, INTERNET, CD, TUNER,
or AUX to select the desired source.
In Eco Power Standby mode
Press STANDBY ON on the system.
Press PC LINK, CD, TUNER, INTERNET
or AUX on the remote control.
Switching the system to
standby mode
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 0.5W)
Press and hold STANDBY ON (or B on the
remote control) for more than three seconds.
" ECO POWER MOD ECO POWER MODE E E E E " is displayed, then the
ECO POWER MOD ECO POWER MOD ECO POWER MOD
display screen will go blank.
The low power LED will be lighted.
14

Power saving automatic standby

As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc has stopped playing.

Dim mode

You can select the desired brightness for the
display.
Press DIM on the remote control repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
and the corresponding dim level will
DIM
appear on the display, except for DIM OFF
mode.
DIM
mode
1
2
3
OFF

Volume control

Adjust SOUND JOG (or press VOLUME
+/- on the remote control) to increase or
decrease the volume level.
" -XX d -XX dB B B B B " is displayed. "XX
-XX d -XX d -XX d
volume level.
To listen through the headphones
Connect the headphones plug to the n socket
at the front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
" MUTE O MUTE ON N N N N " is displayed.
MUTE O MUTE O MUTE O
To restore the volume, press MUTE again or
increase the volume level.
LEDs
on
on
off
on
XX" denotes the
XX XX XX