Cd/ Mp3-Cd Operations; Discs For Playback; Loading Disc - Philips MCI200/21M Manual

IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets.
– Do not load more than one disc into
the tray.

Discs for playback

This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– CD's with MP3 and/or MP3PRO files (files
end with .mp3)
CD / MP3-CD Operations

Loading disc

1
Press OPEN /CLOSE
to open the disc tray.
2
Load in a disc with the
label side facing up.
3
Press OPEN /CLOSE
again to close the disc
tray.
The system detects the type of disc being
loaded, "CD CD" or "MP3 CD MP3 CD" is displayed.
CD CD MP3 CD MP3 CD
CD MP3 CD
The system then starts to retrieve text
information for the disc.
Notes:
– To ensure good system performance, wait until
the disc tray completely reads the disc before
proceeding.
– For MP3 discs, the disc reading time may exceed
10 seconds due to the large number of songs
compiled onto one disc.
PO W
ER ON
/O FF
21