Table of Contents
Advertisement
Timer Recording
Programming recordings
with the G-Code
With this programming system, you only
need to enter the G-Code
number as all the information needed by
the DVD recorder for programming is
contained in the programming number.
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer overview appears.
3
Press the matching colour coded button
on the remote control to select
{ G-Code }.
➜
The G-Code entry screen appears.
4
Use the alphanumeric keypad 0-9 to
enter the G-Code
®
(e.g.,: 5-312-4 or 5,312 4, key in '53124').
➜
This number is up to 9 digits long and
can be found next to the start time of the
TV programme in your TV listings
magazine.
TIPS:
To play a DVD+R on other DVD players, see "Finalising disc (DVD+R)".
During timer recording, press STANDBY-ON will stop recording.
40
DVDR6xx_69_Eng_14212
(cont'd)
®
System
®
programme
number.
40
G
®
To clear the G-Code
matching colour coded button on the
remote control to select { Clear }.
G
®
To cancel the G-Code
press the matching colour coded button
on the remote control to select
{ Cancel }.
➜
The timer overview appears.
5
Press OK to confirm, then press the
matching colour coded button on the
remote control to select
{ Store }.
➜
The system will store the timer entry
and return to the timer overview screen.
G
If the information is missing or not
available, you may be asked to enter more
information. Follow the instructions on
the TV.
G
If you want to make changes, use
3 4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
or the alphanumeric keypad 0-9.
6
To exit, press TIMER.
7
Insert a DVD+R(W).
8
Press STANDBY-ON to switch off the
DVD recorder.
➜
The DVD recorder must be in standby
mode in order for the timer recording to
occur. If not, a warning message will
appear ten minutes before the recording
starts.
➜
If you ignore the warning message, the
DVD recorder will switch to standby
mode automatically before the
programmed recording begin.
➜
The '
' icon will light up on the
TIMER
display panel if a timer recording is set.
9/1/04, 5:30 PM
entry, press the
programming,
3139 246 14212
Advertisement
Table of Contents
