Table of Contents
Advertisement
Option 3 : Using Video
(CVBS) socket
Antenna or
Satellite/Cable TV signal
1
5
This cable, usually featuring yellow cinch
plugs, is used for transmitting the
Composite Video signal (FBAS, CVBS). In
this method of transmission, the colour
signal and the brightness signal are
transmitted on the same cable.
Have the following cables ready:
1) Antenna cable
2) AV cables (yellow/red/white)
1
Turn off your TV and remove the antenna
cable from your TV (or Satellite Receiver/
Cable Box). Insert it to the ANTENNA
input socket at the back of the DVD
recorder.
2
Use the supplied antenna cable to
connect the DVD recorder's TV output
socket to the antenna input socket at the
back of your TV set.
3
Use the supplied AV cables (yellow plug)
to connect the DVD recorder's VIDEO
(CVBS) (OUT 2) socket to the Video
In socket at the back of your TV set (or
labelled as Video In, AV In or Composite).
DVDR6xx_69_Eng_14212
Connecting to TV
2
4
4
Use the supplied AV cables (red/white
plugs) to connect the DVD recorder's
AUDIO L/R (OUT 2) socket to the
audio input socket at the back of your TV
set (or labelled as AV In or Audio In).
5
Connect the power cable from the DVD
recorder's ~ MAINS to the power
supply.
6
Press STANDBY-ON 2 on the DVD
recorder to turn it on.
➜
The message 'IS THE TV ON?'
appears on the display panel.
7
Turn on the TV power. Select the correct
Video In channel at the TV (see page 8).
➜
The first installation menu
{ Language and Country } will appear
on the TV.
8
Proceed to page 20 to continue the first
installation.
11
(cont'd)
3
3139 246 14212
9/1/04, 5:29 PM
11
Advertisement
Table of Contents
