Table of Contents
Advertisement
Connecting to Additional Devices
Using the input sockets
(IN-EXT 1 or IN-EXT2)
You can connect a video cassette
recorder (VCR), DVD player, decoder,
satellite receiver or cable box to the
input sockets at the back of the DVD
recorder (IN-EXT 1 or IN-EXT 2).
The possible connection is depending on
the capabilities of the additional devices.
Switching between S-Video input and
Video (CVBS) input takes place
automatically. If both are used for
connecting to external devices, the signal
from S-Video socket has priority.
The COMPONENT VIDEO (IN-EXT1)
sockets are designed only for 'interlaced'
signals. Progressive Scan input signals
cannot be processed by the DVD
recorder.
12
DVDR6xx_69_Eng_14212
Connecting a Satellite Receiver/
Cable Box
1
If your Satellite Receiver/Cable Box has
only a single antenna output (RF OUT or
TO TV), use the antenna cable to connect
it with the ANTENNA input socket at
the back of the DVD recorder.
ANTENNA
2
For complete connection to your TV set,
see pages 9~11 for details.
G
Alternatively, you can connect it to the
VIDEO (CVBS) (or S-VIDEO (Y/C))
and AUDIO L/R input sockets at the
back of the DVD recorder if your
Satellite Receiver/Cable Box has the same
output sockets.
➜
To watch/record the programmes,
press TUNER on the remote control,
then press 3 4 to select 'EXT 2'.
Cable TV or
Satellite signal
12
IN
OUT
CH3 CH4
Satellite
Receiver/
Cable Box
Satellite
Receiver/
Cable Box
INT IN
TO TV
VIDEO
AUDIO OUT
OUT
R
L
CH3 CH4
3139 246 14212
9/1/04, 5:29 PM
Advertisement
Table of Contents
