Table of Contents
Advertisement
Audio output
After connecting the DVD recorder to
your TV and other devices, you may need
to change the digital output setting.
Adjust the Digital Output only if you used
the DVD recorder's COAXIAL/OPTICAL
socket.
DVD-VIDEO-TITLE 04|CO1
Audio output
Set-up
Digital output
{ Digital output }
– { All } : Select this if you used the
COAXIAL socket to connect the DVD
recorder to a stereo receiver that has a
built-in Multi-Channel decoder.
– { PCM } : Select this if the connected
audio equipment is not capable of decoding
multichannel audio. Dolby Digital and
MPEG-2 multi-channel signals are converted
to PCM (Pulse Code Modulation).
– { Off } : Select this to deactivate the digital
audio output. For example, if you used the
AUDIO OUT sockets to connect the DVD
recorder to a TV or Stereo system.
TIPS:
Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
DVDR6xx_69_Eng_14212
System Menu - Setup
Language
For more information on this menu,
please see page 25 "Setting the language".
STOP
55
(cont'd)
55
3139 246 14212
9/7/04, 11:36 AM
Advertisement
Table of Contents
