Setting the time and date
If the DVD recorder does not set the
time and date correctly, you can set the
clock manually by following the steps
below.
1
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on the TV.
2
Press 4 repeatedly to select { Set-up }.
3
Press 2 repeatedly to select
{ Time-date }.
4
Press 4 to select { Time } and press 2 to
enter the time field.
➜
{ 00 : 00 AM/PM } (hours : minutes.)
5
Press 3 4 to change the first digit and
press 2 to go to the next digit field.
6
5
Repeat step
until the time is entered
correctly, then press OK to confirm.
7
Press 4 to select { Date } and press 2 to
enter the date field.
➜
{ 00 : 00 : 0000 } (day : month : year).
8
5
Repeat step
until the date is entered
correctly, then press OK to confirm.
TIPS:
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
DVDR6xx_69_Eng_14212
Installing the DVD Recorder
Setting the language
You can select the language for subtitles
and audio for DVD playback. For some
DVDs, the subtitle/audio language can only
be changed via the DVD disc menu. If the
selected language is not available on the
disc, the disc's default setting language will
be used instead.
The menu language (on-screen display)
for the system will remain as you set it.
1
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on the TV.
2
Press 4 repeatedly to select { Set-up }.
3
Press 2 repeatedly to select
{ Language }.
4
Press 3 4 to select one of the options
below at a time, then press 2.
– { Menu }: language of the OSD menu
– { Audio }: playback audio language
– { Subtitle }: subtitle language
– { Country }: location
5
Press 3 4 to select a desired language
and press 1 to confirm.
6
Repeat steps
25
(cont'd)
4~5
for other settings.
3139 246 14212
9/1/04, 5:30 PM
25