Programming Recordings With; System - Philips DVDR610/00 User Manual

Programming recordings
with the ShowView
With this programming system, you only
need to enter the ShowView
programme number as all the information
needed by the DVD recorder for
programming is contained in the
programming number.
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer overview appears.
3
Press the matching colour coded button
on the remote control to select
{ ShowView }.
➜
The ShowView
4
Use the alphanumeric keypad 0-9 to
enter the ShowView
(e.g.,: 5-312-4 or 5,312 4, key in '53124').
➜
This number is up to 9 digits long and
can be found next to the start time of the
TV programme in your TV listings
magazine.
TIPS: To play a DVD+R on other DVD players, see "Finalising disc (DVD+R)".
During timer recording, press STANDBY-ON will stop recording.
1DVDR6xx_Eng00_13454c
®

System

®
®
entry screen appears.
®
code.
43
Timer Recording
G
To clear the ShowView
matching colour coded button on the
remote control to select { Clear }.
G
To cancel the ShowView
press the matching colour coded button
on the remote control to select
{ Cancel }.
➜
The timer overview appears.
5
Press OK to confirm, then press the
matching colour coded button on the
remote control to select { Store }.
➜
The system will store the timer entry
and return to the timer overview screen.
G
If the information is missing or not
available, you may be asked to enter more
information. Follow the instructions on
the TV.
G
If you want to make changes, use
3 4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
or the alphanumeric keypad 0-9.
6
To exit, press TIMER.
7
Insert a DVD+R(W).
8
Press STANDBY-ON to switch off the
DVD recorder.
➜
The DVD recorder must be in standby
mode in order for the timer recording to
occur. If not, a warning message will
appear ten minutes before the recording
starts.
➜
If you ignore the warning message, the
DVD recorder will switch to standby
mode automatically before the
programmed recording begins.
➜
The ' ' icon will light up on the
TIMER
display panel if a timer recording is set.
9/28/04, 1:26 PM
(cont'd)
®
entry, press the
®
programming,
43
3139 246 13454