Setting Your Tv Channel Programs; Setting The Date & Time - Philips DVDR3380 User Manual

Step 3: Installation and Setup
Setting your TV channel
programs
Before the recorder can start recording
the TV channel programs, you need to
search for the available TV channels and
store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and switched them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
A
Press SYSTEM-MENU on the remote
control.
The system menu appears on the TV.
B
Use keys to highlight
{ System Menu - Channel Setup }
and press .
System Menu - Channel Setup
Channel Search
Modify Channel Information
Sort Channels
C
Use keys to highlight { Channel
Search } and press OK.
The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total
number of channels found appears on the
TV.
To modify or sort the TV channels,
see the chapter "DVD System Menu
Options – CHANNEL SETUP
settings."
TIPS: Press to go access the options of an item in the menu.
Press SYSTEM-MENU to exit the menu.
Setting the date & time
If the recorder has not set the time
and date correctly, set the clock manually
by following the steps below.
A
Press SYSTEM-MENU.
The system menu appears.
B
Use
{ System Menu - Clock } and press
to confi rm.
C
Use
{ Date (dd/mm/yy) } and press OK.
D
Use
Search
and use
entry fi elds. Press OK to confi rm.
Edit
Sort
Alternatively, you can key in the numbers
using the numeric keypad 0-9 on the
remote control.
E
To confi rm all changes, press OK.
F
Move to { Time (hh:mm:ss) } and
repeat step
(continued)
keys to select
System Menu - Clock
31/01/06
Date(dd/mm/yy)
Time(hh:mm:ss) 10 : 33 : 57
Show DivX registration code
keys to highlight
keys to change the numbers
keys to select different
D E
~ .
OK
21