Table of Contents
Advertisement
ALARM SETUP
The procedure described below let you set the modes
when an alarm is received.
Move the cursor to ALARM SETUP in the SETUP MENU
by pressing the C or D button and then press the
[HOME/SET] button.
The ALARM SETUP menu as shown in the figure
appears on the monitor screen.
ALM RECALL *
ALM SCHEDULE
CAM SITE ALM
VIDEO LOSS ALM ON
SW-LOSS ALM
ALM DISPLAY
ALM OUTPUT DUR 2SEC
ALM BUZZER DUR 2SEC
ALM MODE-MLT
DWELL TIME
ALM MODE-SPT
DYNAMIC REC
ALM REC MODE
Alarm Recall
There are 100 alarm records stored in chronological order
in 10 pages of table.
The tables also indicate the alarm mode.
1. Move the cursor to ALM RECALL by pressing the C or
D button and then press the [HOME/SET] button.
The ALARM RECALL table appears on the monitor
screen.
NO.
DATE
10. JAN
1. 97 12:00:00 16CH TRM 12
9. DEC 12. 96
8. DEC 12. 96
7. DEC 12. 96
6. DEC 12. 96
5. DEC 11. 96 15:00:00
4. DEC 11. 96 14:00:00
3. DEC 11. 96 13:00:00
2. DEC 11. 96 12:00:00
1. DEC 11. 96 12:00:00
DISPLAY
The table lists the activated alarm modes (ALM-MODE)
as follows:
TRM
: Interface Alarm
CH-LOSS: Video Input Signal Loss Alarm
SITE: Camera Site Alarm
PC : PC Command Alarm
2. Press the D button to select the next page of the table.
3. Press the C button to back up to the previous page of
the table.
26
ALARM SETUP
OFF
OFF
OFF
ON
ALM-IND
2SEC
ALM-SPOT
OFF
MODE0 REAL
ALARM RECALL
1 OF10
TIME
CAM
ALM-MODE
4:00:00 10CH SITE
3:00:00
8CH SITE
2:00:00
7CH SITE
1:00:00
6CH TRM
1
5CH TRM
5
4CH TRM 14
3CH TRM
7
2CH CH-LOSS
1CH CH-LOSS
( )NEXT ( )PRE
4. To clear all alarm records, press the A or B button to
select CLEAR where the cursor is positioned, then
press the [HOME/SET] button.
5. Press the [SET UP/ESC] button to return to the previous
ALARM SETUP menu.
Alarm Schedule
This item lets you enable or disable the system alarm func-
tion.
1. Move the cursor to the ALM SCHEDULE parameter by
pressing the C or D button.
2. Select ON or OFF by pressing the A or B button.
ON: Enables system alarm function.
OFF: Disables system alarm function.
The factory default setting is OFF.
3. To set the timer, press the [HOME/SET] button while the
cursor is positioned on ON.
The cursor moves to the timer editing area.
ALARM SETUP
ALM RECALL *
ALM SCHEDULE
CAM SITE ALM
VIDEO LOSS ALM ON
SW-LOSS ALM
ALM DISPLAY
ALM OUTPUT DUR 2SEC
ALM BUZZER DUR 2SEC
ALM MODE-MLT
DWELL TIME
ALM MODE-SPT
DYNAMIC REC
ALM REC MODE
4. Press the C or D button to move the cursor to the
desired position, then adjust the time when the alarm is
to be activated by pressing the A or B button.
Notes:
• If the same time is set for start and stop time, the
alarm is always enabled.
• You can set the timer to extend into the next day, for
example, 22:00 - 6:00.
5. Press the [SET UP/ESC] button to move the cursor to
ON position.
ON
0:00- 0:00
OFF
OFF
ON
ALM-IND
2SEC
ALM-SPOT
OFF
MODE0 REAL
Advertisement
Table of Contents
