Panasonic WJ-FS616C Operating Instructions Manual page 38

2. Select SEQ1 and then press the [HOME/SET] button.
The SEQ1 SETUP menu shown in the figure appears on
the monitor screen.
SEQ1(SPOT-SEQUENCE)SETUP 1 OF 2
AUTO SKIP
DWELL TIME 2SEC
STEP CAM PRE TIME
1 1CH -
2 2CH -
3 3CH -
4 4CH -
5 5CH -
6 6CH -
7 7CH -
8 8CH -
Auto Skip
1. Move the cursor to the AUTO SKIP parameter.
2. Select either ON or OFF.
ON: Enables the auto skip function.
OFF: Disables the auto skip function.
The factory default setting is OFF.
Note: The auto skip function is not available when play-
ing back videotape images.
Image Assignment
1. Move the cursor to the CAM column you want to edit for
the step number by pressing the C, D, A or B button.
2. Select the desired camera or playback channel in the
CAM column by pressing the - or + button.
1 - 16: Camera Channel
P1 - P16: Playback Channel
–: Not Assigned
Notes:
• Pressing the Camera Number button assigns the
camera channel directly.
• Any playback steps programmed in a sequence are
excluded from display on the spot monitor and mul-
tiscreen 2 monitor due to the way the system is
designed.
3. Repeat steps 1 and 2 above to assign other steps.
Preset Position
1. Move the cursor to the PRE column you want to edit for
the step number by pressing the C, D, A or B button.
38
OFF
STEP CAM PRE TIME
2SEC 9 9CH - 2SEC
2SEC 10 10CH - 2SEC
2SEC 11 11CH - 2SEC
2SEC 12 12CH - 2SEC
2SEC 13 13CH - 2SEC
2SEC 14 14CH - 2SEC
2SEC 15 15CH - 2SEC
2SEC 16 16CH - 2SEC
2. Select the desired preset position number for the cam-
era in the PRE column by pressing the - or + button.
Note: A preset position assigned to a step that has
been assigned to a playback channel is invalid.
3. Repeat steps 1 and 2 above to assign other steps.
Dwell Time
• Uniform Dwell Time
1. Move the cursor to the DWELL TIME parameter by
pressing the C or D button.
2. Select the desired dwell time by pressing the A or
B button.
Dwell Time can be selected between 0SEC and
30SEC.
Note: If 0SEC is selected for the dwell time, the
spot sequence is not activated.
• Individual Dwell Time
1. Move the cursor to the TIME column you want to
edit for the step number by pressing the C, D, A
or B button.
2. Select the desired dwell by pressing the - or +
button.
Steps for which a different dwell time has been
selected are marked "–" in the DWELL TIME para-
meter. Previous settings made in the DWELL TIME
parameter become invalid.
Programming Steps 17 to 32
1. Press the [FUNCTION] button to display the next page
of the table.
The table shown in the figure appears on the monitor
screen.
SEQ1(SPOT-SEQUENCE)SETUP 2 OF 2
STEP CAM PRE TIME
17 - - 2SEC
18 - - 2SEC
19 - - 2SEC
20 - - 2SEC
21 - - 2SEC
22 - - 2SEC
23 - - 2SEC
24 - - 2SEC
2. Program the sequence pattern for steps 17 to 32 as
described previously.
3. Press the [FUNCTION] button to display the previous
page of the table.
STEP CAM PRE TIME
25 - - 2SEC
26 - - 2SEC
27 - - 2SEC
28 - - 2SEC
29 - - 2SEC
30 - - 2SEC
31 - - 2SEC
32 - - 2SEC