Table of Contents
Advertisement
Alarm Mode on the Multiscreen
Monitor
This item lets you select the mode for displaying an alarm
on the multiscreen monitor.
1. Move the cursor to the ALM MODE-MLT parameter.
2. Select the desired mode.
ALM-LINK: Switches screen to the camera image of
the corresponding channel with an alarm title super-
imposed.
ALM-IND: Retains the camera image currently select-
ed.
An alarm title appears overlapped on the camera
image.
If no camera is currently selected the alarm title
does not appear.
The factory default setting is ALM-IND.
3. When ALM-LINK is selected for the parameter, then the
cursor can be moved to the DWELL TIME parameter.
Dwell Time for Alarm Sequence
If more than one alarm is activated when ALM-LINK is
selected, the respective camera images are displayed in
quad mode on the multiscreen monitor.
From the fifth alarm on, the images are displayed sequen-
tially in quad mode.
This item lets you set the dwell time for the alarm sequence.
1. Move the cursor to the DWELL TIME parameter.
2. Select the desired dwell time.
1SEC - 30SEC: Selects a dwell time between 1 second
and 30 seconds.
The factory default setting is 2 SEC.
28
Alarm Mode on the Spot Monitor
This item lets you select the mode for displaying an alarm
on the spot monitor.
1. Move the cursor to the ALM MODE-SPT parameter.
2. Select the desired mode.
ALM-SPOT: The camera image that has activated the
alarm is displayed in single spot mode.
If multiple alarms are activated, the monitor displays
the camera image that has activated the alarm most
recent.
ALM-IGNORE: Ignores alarms activation and retains
the camera image currently selected.
The factory default setting is ALM-SPOT.
Dynamic Recording
In this mode, the camera image of the channel on which the
alarm was activated is recorded preferentially over other
video inputs.
This item lets you enable or disable dynamic recording
mode for recording on videotape.
1. Move the cursor to the DYNAMIC REC parameter.
2. Select either ON or OFF.
ON: Enables dynamic recording.
OFF: Disables dynamic recording.
The factory default setting is OFF
Alarm Recording Mode
This item lets you select the mode for recording an alarm.
Refer to Recording Mode Setup on page 33 for further
details.
1. Move the cursor to the ALM REC MODE parameter.
2. Select the desired recording mode.
MODE 0: Normal Recording
MODE 1-8: Time lapse mode without camera switching
pulse.
MODE 9: Time lapse mode with camera switching
pulse.
The factory default setting is MODE 0.
3. After completed the setting, press the [SET UP/ESC]
button to return to the previous WJ-FS616C SETUP
Advertisement
Table of Contents
