Panasonic AJ-HD150 Operating Instructions Manual page 49

Setup menus
The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In
addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files.
Loading a user file
1
2
3
4
5
6
7
8
Load or save
USER1
Load or save
Load or save
Load or save
Press the MENU button.
While holding down the STANDBY button, press the REW or FF button, and select
USER1.
Turn the search dial and move the cursor (
(LOAD).
SETUP-MENU
<USER1>
759 REC PT MUTE
A00 LOAD
¢
A01 SAVE
A02 P.ON LOAD
END
While holding down the search button, turn the search dial and select the user file
whose contents are to be loaded into USER1.
Press the SET button. The following messages appear on the menu screen and
counter display.
Menu screen
SETUP-MENU LOAD
USER2
YES<PLAY>/NO<STOP>
The user file number selected in step 4 is displayed in the shaded area.
Press the PLAY button. The settings of the user file selected in step 4 are loaded, and
the USER1 menu display appears. When the STOP button is pressed, the USER1
menu display appears while the settings remain unchanged.
Turn the search dial and move the cursor (
except No. A00 (LOAD) and No. A01 (SAVE).
Press the SET button. The USER1 settings are now stored in the memory.
If the USER1 settings are not going to be stored in the memory, do not press the SET
button but press the MENU button.
USER2
Settings can be locked.
USER3
Settings can be locked.
USER4
Settings can be locked.
USER5
Settings can be locked.
) on the menu screen to setup item No. A00
¢
MENU
NO.A00 - 0000
OFF
USER2
USER2
OFF
USER1 OK?
) on the menu screen to any setup item
¢
– 49 –