Connecting Receiver And Control Cable Aw-Ca12T11 - Panasonic AW-PB308 Operating Instructions Manual

Connecting Receiver and Control Cable AW-CA12T11

• The control cable AW-CA12T11 is provided with a circuit board and spacers.
• Assemble the circuit board and spacers with the receiver WV-RC100 (WV-RC150), and connect the control cable to that
circuit board.
q Remove the two screws on the connector board
shown from inside the receiver.
Screws
w Fit the two spacers on the connector board and fas-
ten the circuit board with the screws removed in Step
q .
Spacer
Circuit board, an accessory to the cable
-12-