Related Manuals for Panasonic AW-PB304
Summary of Contents for Panasonic AW-PB304
-
Page 1: Sdi Card
SDI Card AW-PB304 Model No. Before attempting to connect or operate this product, please read these instructions completely and save this manual for future use. - Page 2 For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference when the equipment is operated in a commercial environ- RISK OF ELECTRIC SHOCK DO NOT OPEN...
-
Page 3: Table Of Contents
CONTENTS WARNING/CAUTION FOR SAFETY ............................4 PREFACE ....................................5 PRECAUTIONS ..................................5 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ....................6 MOUNTING .................................... 7 CONNECTION ..................................9 APPEARANCE ..................................10 SPECIFICATIONS ................................... 11 STANDARD ACCESORIES ..............................11... -
Page 4: Warning/Caution For Safety
WARNING/CAUTION FOR SAFETY WARNING CAUTION • Refer all servicing to qualified personnel • Do not drop the product, do not expose it to strong To reduce the risk of electric shock, don't remove shock, or do not step on it, to prevent a fire and cover or back, unless you are a qualified personnel. -
Page 5: Preface
PREFACE • When the SDI card is installed in a convertible cam- era, for example, AW-E600, Serial digital compo- nent signal can be output. PRECAUTIONS • Power Off Before Connecting or Disconnecting • Avoid Humidity and Dust. Cables Avoid using the product at a humid, dusty place Before plugging or unplugging the cables, be sure because much humidity and dust will cause dam- to switch power off. -
Page 6: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS SDI output connector [SDI OUT] Serial digital component signal can be output. SDI OUT... -
Page 7: Mounting
MOUNTING CAUTION (1) Switch the camera off, and disconnect the power connector and other cables from the camera. • Be sure to ask your store, where you purchased the product, for mounting. (2) Loosen the four screws on the rear of the camera •... - Page 8 P a n a s o n i c Rear panel Option card slot cover Card setscrews (6 mm) P a n a s o n i c Rear panel setscrews (8 mm) SDI card...
-
Page 9: Connection
CONNECTION • Use the AC adapter AW-PS505 for power supply. Use the power cable AW-CA4T1. OPTION CARD VIDEO OUT I/F REMOTE MENU VTR etc. G/L IN ITEM/AWC YES/ABC Coaxial cable (5C-2V) SDI OUT IRIS NO/BAR – DC12V IN Unit with SDI input DC power cable AW-CA4T1 FUSE(POWER) -
Page 10: Appearance
APPEARANCE Unit: mm (inch) 111 (4-3/8) 91.7 (3-5/8) 21.5 (27/32) SDI OUT -10-... -
Page 11: Specifications
SPECIFICATIONS Output: 270Mb/s component output (SMPTE 259M) Source voltage: 12 V DC (supplied from camera) Power consumption: Operating temperature: 10°C to +45°C (14°F to +113°F) Operating humidity: 30 % to 90 % Dimensions: 21.5 (W) x 70 (H) x 111 (D) mm [27/32” x 2-3/4” x 4-3/8”] 110 g Weight: Weight and dimensions indicated are approximate. - Page 12 Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76 Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024...