Panasonic indoor pan-tilt head model aw- ph350 operating instructions (34 pages)
Summary of Contents for Panasonic AW-PB302
Page 1
RGB Card AW-PB302 Before attempting to connect or operate this product, please read these instructions completely.
Page 2
For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference when the equipment is operated in a commercial environ- RISK OF ELECTRIC SHOCK DO NOT OPEN...
CONTENTS PREFACE ....................................2 SPECIAL NOTES ON OPERATION ............................2 PRECAUTIONS ..................................3 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ....................4 MOUNTING .................................... 5 Connecting RGB Monitor or Image Processor ........................7 MENU ITEM SETTING ................................8 APPEARANCE ..................................10 SPECIFICATIONS ...................................
PREFACE • When the RGB card is installed in a convertible camera, for example, AW-E300, R/G/B or Y/Pr/Pb component signals can be output. SPECIAL NOTES ON OPERATION • Power Off Before Connecting or Disconnecting • Avoid Humidity and Dust. Cables Avoid using the product at a humid, dusty place Before plugging or unplugging the cables, be sure because much humidity and dust will cause dam-...
PRECAUTIONS • Ask a qualified service person for repairs when necessary. • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre- vent electric shock, do not remove screws or cov- ers. There are no user-serviceable parts inside. •...
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Video/RGB Output Connector [VIDEO/RGB] Composite signals, RGB/YPrPb/YC component signals, and synchronizing signals are output. These output signals can be selected using the menu. VIDEO/RGB Use the special cable WV-CA9T5 (Dsub-BNC) or WV- CA9T9 (Dsub-Dsub) to connect to it. Pin No.
MOUNTING CAUTION (1) Switch the camera off, and disconnect the power connector and other cables from the camera. • Be sure to ask your store, where you purchased the product, for mounting. (2) Loosen the four screws on the rear of the camera •...
Page 8
P a n a s o n i c Rear panel Option card slot cover Card setscrews (6 mm) P a n a s o n i c Rear panel setscrews (8 mm) RGB card...
Connecting RGB Monitor or Image Processor • To input signals to an RGB monitor or image processor, connect the VIDEO/RGB output connector to it with the cable WV-CA9T5 (Dsub-BNC: 5 m) or WV-CA9T9 (Dsub-Dsub: 5 m). • Use the AC adapter AW-PS505 for power supply. Use the power cable AW-CA4T1.
MENU ITEM SETTING A convertible camera, for example, AW-E300, can be MAIN MENU SCREEN set using the menu as suited to the system and shoot- Main Menu of Halogen, ing conditions. For details, refer to the operation manu- Fluorescent, Outdoor Mode al for the camera.
Page 11
(2) The setting item (flashing) changes each time the CAMERA menu switch, item switch, or NO switch is pressed. Select [Option Card Set] and press the YES switch OPTION CARD VIDEO OUT I/F REMOTE to display the [Option Card Set] submenu. MENU MENU Switch i “...
Page 14
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200...