Changing The Zoom Setting; Changing Scrolling Behavior; Adjusting The Dtmf Setting - Motorola Timeport 270c Reference Manual

Changing the Zoom Setting

You can set your phone's display to show either six lines or four lines of text plus soft key labels. Six lines
of text display more information, while four lines increase text size.
Shortcut: To change the display view, press
seconds of the first press.
To change the display zoom setting from the menu:
Find the Feature
Press
1 S
SELECT +
2 ( )

Changing Scrolling Behavior

You can select one of two scrolling behaviors for navigating up and down a menu list with the S key:
Up/Down
Wrap Around
To change the scrolling behavior:
Find the Feature
Press
1 S
+
SELECT
2 ( )

Adjusting the DTMF Setting

Your phone transmits dual tone multi-frequency (DTMF) tones when you press a key on the keypad.
These tones are used to communicate with automated systems, such as credit card entry, password
entry, or number linking.
Your phone can send DTMF tones to the network in long or short form. The long form (default setting),
transmits tones for as long as you press a key. The short form transmits the tones for a limited time
period determined by your carrier's automated calling system requirements.
Find the Feature
88
Initial Setup
M
M
Settings
>
To
Zoom In
toggle between
confirm the new setting
The cursor stops when it reaches the top or bottom of the menu list.
The cursor wraps around when it reaches the top or bottom of the menu list, and
reappears at the opposite end of the list.
M Settings
>
To
Up/Down
toggle between
confirm the new setting
M
Settings
>
once, then press and hold
Other Settings Initial Setup
> >
Zoom Out
and
Other Settings Initial Setup
> >
Wrap Around
or
Other Settings Initial Setup
> >
M
again within two
Zoom
>
Scroll
>
DTMF
>