Table of Contents
Advertisement
TIP To merge Address Books, ensure the Address Books are
saved as separate .ADR file names, then merge them using
the Import/Merge menu command. See "To merge two
Address Book files on your PC:" on page 62 for instructions
on merging two Address Book files.
6. Click
, or from the File menu, click
7. Select the file location, type the name for the new Address Book
file, then click
.
1. Snap your pager into the docking station.
2. On your pager, select
then select
and wait for the Connection Status screen.
3. On your PC, open the FLEX PC Partner Shell, then double-click
.
4. Click
, or from the File menu, click
5. Select or type the name of the .ADR file you want to transfer,
then click
.
6. Click
, or from the File menu, click
7. Click
. Status messages on your PC screen notify you
of the progress of the transfer.
TIP If you have made changes to the Address Book on your pager
that are not included in the Address Book on your PC and
you do not want to lose the changes, transfer the Address
Book on your pager to your PC. Save the file to a different
.ADR name, then merge the file with the Address Book on
your PC. Send the final merged Address Book to your pager.
8. On your pager, select
.
Ä
Your paging functions are suspended while a connection exists
between your pager and PC. When you have finished transfer-
ring data, select
to re-enable the send and receive
functions.
.
from the menu wheel,
.
.
Managing Address Book Files
Managing your Address Book files comprises creating, saving,
opening, merging, importing and deleting the files.
Ä
Your pager does not need to be connected to your PC to perform
the following procedures, unless noted otherwise.
TIP Delete .ADR files that you no longer need.
1. On your PC, open the FLEX PC Partner Shell, then double-click
.
2. Click
, or from the File menu, click
Address Book file is open, FLEX PC Partner prompts you to
save your changes before closing it.
3. A blank Address Book appears, ready for you to enter new
addresses and create new groups.
4. Upon completing entries in your new Address Book, click
or select the File menu, then click
5. Select the file location, type the name for the new Address Book
file, then click
.
With the Address Book file open, click
click
.
If this Address Book file has not been saved already, FLEX PC
Partner prompts you for a file name. Type the file name, then click
.
1. From the File menu, click
.
2. Select the file location, type the new name for the Address Book
file, then click
.
Ä
You do not need to type the file extension. The FLEX PC Partner
application automatically appends the .ADR default extension.
. If an existing
,
.
, or from the File menu,
Advertisement
Table of Contents
