Cabling The Ethernet Or Hpna Lan; Obtaining An Ip Address In Windows 98, Windows 98 Se, Or Windows Me; Obtaining An Ip Address In Windows 2000 Or Windows Xp; Obtaining An Ip Address On Macintosh Or Unix Systems - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Cabling the Ethernet or HPNA LAN

After connecting to the cable system, you can connect your wired Ethernet and/or HPNA LAN. Some samples are
shown in "Wired Ethernet LAN"
cabling is beyond the scope of this document. You must install proper drivers for the Ethernet
adapter.

Obtaining an IP address in Windows 98, Windows 98 SE, or Windows Me

You must do the following on each Ethernet client PC running Windows 98, Windows 98 SE, or Windows Me:
1
On the Windows Desktop, click Start.
2
Select Run. The Run window is displayed.
3
Type winipcfg.exe and click OK. The IP Configuration window is displayed:
4
Click the Renew button to obtain an IP address for the PC from the DHCP server on the SBG1000.

Obtaining an IP address in Windows 2000 or Windows XP

You must do the following on each Ethernet client PC running Windows 2000 or Windows XP:
1
On the Windows Desktop, click Start.
2
Select Run. The Run window is displayed.
3
Type cmd and click OK to display a command prompt window.
4
Type ipconfig /renew and press
SBG1000.
5
Type exit and press

Obtaining an IP address on Macintosh or UNIX Systems

Follow the instructions in your user manual.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
on page 10 and "HPNA LAN"
to obtain an IP address for the PC from the DHCP server on the
ENTER
to return to Windows.
ENTER
X
23
Exit
FAQ Specifications Glossary License
on page 13. Detailed information about network
SBG1000 Wireless Cable Modem Gateway User Guide
NIC or HPNA